Lucent-technologies Network Access Module Bedienungsanleitung PDF herunterladen (Seite 54)

Using the DS-1 Test Jacks

A-6 INA Module Installation and Configuration Guide

Table A-3 DS-1 Test Jacks Description

Test Jack Label Description and Usage

MON In Monitor In. This jack allows external test equipment to

passively monitor the T1/PRI signal coming from the

network to the INA module. The use of this jack does not

disrupt the T1/PRI signal received by the INA module from

the network.

MON Out Monitor Out. This jack allows external test equipment to

passively monitor the T1/PRI signal going to the network

from the INA module. The use of this jack does not disrupt

the T1/PRI signal transmitted by the INA module to the

network.

NET In Network In. An intrusive, break-in jack that allows external

test equipment to inject a T1/PRI signal to the network. The

use of this jack disrupts the T1/PRI signal transmitted by the

INA module to the network.

EQPT Out Equipment Out. An intrusive, break-in jack that allows

external test equipment to intercept and terminate the

T1/PRI signal coming from the INA module. The use of this

jack disrupts the T1/PRI signal transmitted by the INA

module to the network.

NET Out Network Out. An intrusive, break-in jack that allows

external test equipment to intercept and terminate the

T1/PRI signal coming from the network. The use of this jack

disrupts the T1/PRI signal received by the INA module from

the network.

EQPT In Equipment In. An intrusive, break-in jack that allows

external test equipment to inject a T1/PRI signal to the INA

module. The use of this jack disrupts the T1/PRI signal

received by the INA module from the network.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 74 75

Keine Kommentare

Lucent-technologies Network Access Module Bedienungsanleitung Seite 54