Lucent Technologies Window SLV 9124 Bedienungsanleitung

9124-A2-LB20-00March 2000FrameSaverrSLV 9124User's Guide

vii9124-A2-LB20-00March 2000About This GuidePurpose and Intended AudienceThis document contains information that applies to the Model 9124 FrameSaver

Security and Logins 4-39124-A2-LB20-00March 2000" ProcedureTo limit asynchronous terminal access to the menu-driven user interface:1. Select the

Security and Logins 4-49124-A2-LB20-00March 2000Controlling External COM Port Device AccessDial-in access can be controlled when an external device (m

Security and Logins 4-59124-A2-LB20-00March 2000Limiting Telnet AccessTelnet access can be limited by:H Disabling Telnet access completely.H Requiring

Security and Logins 4-69124-A2-LB20-00March 2000Limiting FTP AccessFTP access can be limited by:H Disabling FTP access completely.H Requiring a user I

Security and Logins 4-79124-A2-LB20-00March 2000Limiting Telnet or FTP Access Over the TS Management Link"ProcedureTo limit Telnet or FTP access

Security and Logins 4-89124-A2-LB20-00March 2000Controlling SNMP AccessThe FrameSaver unit supports SNMP Version 1, which provides limited securitythr

Security and Logins 4-99124-A2-LB20-00March 2000Assigning SNMP Community Names and Access LevelsThe FrameSaver unit supports the SNMP protocol and can

Security and Logins 4-109124-A2-LB20-00March 2000Limiting SNMP Access Through IP AddressesAn additional level of security is provided by:H Limiting th

Security and Logins 4-119124-A2-LB20-00March 2000See Configuring SNMP NMS Security Options in Chapter 3, Configuration, formore information about SNMP

Security and Logins 4-129124-A2-LB20-00March 2000See Configuring SNMP NMS Security Options in Chapter 3, Configuration, formore information about secu

About This Guide viii9124-A2-LB20-00March 2000Section DescriptionChapter 7 Setting Up OpenLane for FrameSaver Devices. Identifieswhere installation an

5-19124-A2-LB20-00March 2000Operation and Maintenance5This chapter includes the following information:H Displaying System InformationH Viewing LEDs a

Operation and Maintenance 5-29124-A2-LB20-00March 2000H FTP File Transfers— Upgrading System Software— Determining Whether a Download is Completed— Ch

Operation and Maintenance 5-39124-A2-LB20-00March 2000Viewing LEDs and Control LeadsThe FrameSaver 9124 unit’s faceplate includes LEDs (light-emitting

Operation and Maintenance 5-49124-A2-LB20-00March 2000LED DescriptionsThe following table identifies the alarms that cause the Alarm LED to light. See

Operation and Maintenance 5-59124-A2-LB20-00March 2000Table 5-2. Network and DSX-1 Interface LEDsLabelIndication Color What It MeansSIG Signal Green O

Operation and Maintenance 5-69124-A2-LB20-00March 2000Control Lead DescriptionsFor the network and DSX-1 interfaces, see Table 5-2, Network and DSX-1I

Operation and Maintenance 5-79124-A2-LB20-00March 2000Device MessagesThese messages appear in the messages area at the bottom of the screens.All devic

Operation and Maintenance 5-89124-A2-LB20-00March 2000Table 5-5. Device Messages (2 of 5)Message What To DoWhat It IndicatesFile Transfer Failed –Inva

Operation and Maintenance 5-99124-A2-LB20-00March 2000Table 5-5. Device Messages (3 of 5)Message What To DoWhat It IndicatesLimit of PVCConnections re

Operation and Maintenance 5-109124-A2-LB20-00March 2000Table 5-5. Device Messages (4 of 5)Message What To DoWhat It IndicatesNo PrimaryDestination Lin

About This Guide ix9124-A2-LB20-00March 2000Product-Related DocumentsDocument Number Document TitleFrameSaver SLV Documentation:9124-A2-LN10 FrameSave

Operation and Maintenance 5-119124-A2-LB20-00March 2000Table 5-5. Device Messages (5 of 5)Message What To DoWhat It IndicatesTest Active No higher pri

Operation and Maintenance 5-129124-A2-LB20-00March 2000Status InformationStatus information is useful when monitoring the FrameSaver unit. The followi

Operation and Maintenance 5-139124-A2-LB20-00March 2000System and Test Status MessagesSystem and test status information is selected from the Status m

Operation and Maintenance 5-149124-A2-LB20-00March 2000Health and Status MessagesThe following table provides Health and Status messages that apply to

Operation and Maintenance 5-159124-A2-LB20-00March 2000Table 5-7. Health and Status Messages (2 of 4)Message What It IndicatesEER at Network 1 The err

Operation and Maintenance 5-169124-A2-LB20-00March 2000Table 5-7. Health and Status Messages (3 of 4)Message What It IndicatesOOF at Network 1 An Out

Operation and Maintenance 5-179124-A2-LB20-00March 2000Table 5-7. Health and Status Messages (4 of 4)Message What It IndicatesTime Slot Discovery in P

Operation and Maintenance 5-189124-A2-LB20-00March 2000Table 5-8. Test Status Messages (2 of 2)Message What It IndicatesLLB Active, [Network 1/DSX-1]

Operation and Maintenance 5-199124-A2-LB20-00March 2000Network LMI-Reported DLCIs StatusNetwork LMI-reported DLCI statuses are selected from the Statu

Operation and Maintenance 5-209124-A2-LB20-00March 2000Table 5-9. Network LMI-Reported DLCIs StatusFieldStatus What It IndicatesDLCI 16 through 1007 I

About This Guide x9124-A2-LB20-00March 2000Conventions UsedConvention Used When UsedItalic To indicate variable information (e.g.,DLCI nnnn).Menu sele

Operation and Maintenance 5-219124-A2-LB20-00March 2000PVC Connection StatusPVC connection statuses are selected from the Status menu.Main Menu →Statu

Operation and Maintenance 5-229124-A2-LB20-00March 2000Table 5-10. PVC Connection Status (2 of 2)Field What It IndicatesStatusEDLCI 0 to 62 For multip

Operation and Maintenance 5-239124-A2-LB20-00March 2000Time Slot Assignment StatusTime Slot assignments are made using the Time Slot Assignment config

Operation and Maintenance 5-249124-A2-LB20-00March 2000The following information is available for network interface time slots (N01– N24):The Cross Co

Operation and Maintenance 5-259124-A2-LB20-00March 2000The following information is available for DSX-1 interface time slots (D01– D24):The Cross Conn

Operation and Maintenance 5-269124-A2-LB20-00March 2000Clearing Performance StatisticsPerformance statistics counters can be reset to the baseline whe

Operation and Maintenance 5-279124-A2-LB20-00March 2000Service Level Verification Performance StatisticsThese statistics appear when Service Level Ver

Operation and Maintenance 5-289124-A2-LB20-00March 2000Table 5-11. Service Level Verification Performance Statistics (2 of 2)Statistic What It Indicat

Operation and Maintenance 5-299124-A2-LB20-00March 2000The statistics collected by the unit depend upon the device at the far end of theconnection. If

Operation and Maintenance 5-309124-A2-LB20-00March 2000Table 5-12. DLCI Performance Statistics (2 of 2)Statistic What It IndicatesH With BECN Set H Th

1-19124-A2-LB20-00March 2000About the FrameSaver SLV 91241This chapter includes the following:H SLM OverviewH FrameSaver SLV 9124 FeaturesSLM Overvie

Operation and Maintenance 5-319124-A2-LB20-00March 2000Frame Relay Performance StatisticsThe following statistics appear when Frame Relay is selected

Operation and Maintenance 5-329124-A2-LB20-00March 2000Table 5-13. Frame Relay Performance Statistics (2 of 3)Statistic What It IndicatesFrame Relay E

Operation and Maintenance 5-339124-A2-LB20-00March 2000Table 5-13. Frame Relay Performance Statistics (3 of 3)Statistic What It IndicatesFrame Relay H

Operation and Maintenance 5-349124-A2-LB20-00March 2000ESF Line Performance StatisticsThese statistics appear when ESF Line is selected from the Perfo

Operation and Maintenance 5-359124-A2-LB20-00March 2000ESF Line Performance Statistics Screen Examplemain/status/performance/esf 9124-IIDevice Name: N

Operation and Maintenance 5-369124-A2-LB20-00March 2000The following performance statistics are collected for ESF line conditions:StatisticWhat It Ind

Operation and Maintenance 5-379124-A2-LB20-00March 2000FTP File TransfersThe FrameSaver unit supports a standard File Transfer Protocol (FTP) serverov

Operation and Maintenance 5-389124-A2-LB20-00March 2000" ProcedureTo initiate an FTP session:1. Start the FTP client program on your host. For ex

Operation and Maintenance 5-399124-A2-LB20-00March 2000Upgrading System SoftwareIf you need to upgrade the FrameSaver unit’s program code, you must tr

Operation and Maintenance 5-409124-A2-LB20-00March 2000Determining Whether a Download Is CompletedTo see whether a download has completed, check the I

About the FrameSaver SLV 9124 1-29124-A2-LB20-00March 2000FrameSaver SLV 9124 FeaturesThe FrameSaver SLV 9124 unit provides the following features:H I

Operation and Maintenance 5-419124-A2-LB20-00March 2000Transferring Collected DataSLV user history statistics and LMI packet capture data can be uploa

Operation and Maintenance 5-429124-A2-LB20-00March 2000This page intentionally left blank.

6-19124-A2-LB20-00March 2000Troubleshooting6This chapter includes the following:H Problem IndicatorsH Resetting the Unit and Restoring Communication—

Troubleshooting 6-29124-A2-LB20-00March 2000H Physical Tests— Line Loopback— Payload Loopback— Repeater Loopback— DTE Loopback— Send Line Loopback— Da

Troubleshooting 6-39124-A2-LB20-00March 2000Resetting the Unit and Restoring CommunicationYou can reset the unit in one of four ways:H Reset it from t

Troubleshooting 6-49124-A2-LB20-00March 2000Restoring Communication with a Misconfigured UnitMisconfiguring the unit could render the menu-driven user

Troubleshooting 6-59124-A2-LB20-00March 2000Troubleshooting Management Link FeatureA dedicated troubleshooting management link is available to help se

Troubleshooting 6-69124-A2-LB20-00March 2000Viewing Captured Packets from the Menu-Driven User InterfaceThe twelve most recent LMI events are stored i

Troubleshooting 6-79124-A2-LB20-00March 2000AlarmsThe following table describes the alarm conditions that will generate an SNMPtrap for a physical int

Troubleshooting 6-89124-A2-LB20-00March 2000Table 6-1. Alarm Conditions (2 of 6)Alarm Condition What To DoWhat It IndicatesDLCI nnnn Down,frame relay

About the FrameSaver SLV 9124 1-39124-A2-LB20-00March 2000H RMON-Based User History Statistics Gathering. Provides everythingneeded to monitor network

Troubleshooting 6-99124-A2-LB20-00March 2000Table 6-1. Alarm Conditions (3 of 6)Alarm Condition What To DoWhat It IndicatesLMI Down,frame relay link2T

Troubleshooting 6-109124-A2-LB20-00March 2000Table 6-1. Alarm Conditions (4 of 6)Alarm Condition What To DoWhat It IndicatesLOS at DSX-1 A Loss of Sig

Troubleshooting 6-119124-A2-LB20-00March 2000Table 6-1. Alarm Conditions (5 of 6)Alarm Condition What To DoWhat It IndicatesOOF at Network 1 An Out of

Troubleshooting 6-129124-A2-LB20-00March 2000Table 6-1. Alarm Conditions (6 of 6)Alarm Condition What To DoWhat It IndicatesSelf-Test Failure The unit

Troubleshooting 6-139124-A2-LB20-00March 2000Troubleshooting TablesThe unit is designed to provide many years of trouble-free service. However, if apr

Troubleshooting 6-149124-A2-LB20-00March 2000Table 6-2. Device Problems (2 of 2)Symptom SolutionsPossible CauseCannot access theunit or themenu-driven

Troubleshooting 6-159124-A2-LB20-00March 2000Frame Relay PVC ProblemsTable 6-3. Frame Relay PVC ProblemsSymptomPossible Cause SolutionsNo receipt ortr

Troubleshooting 6-169124-A2-LB20-00March 2000Tests AvailableThe following tests are available to a FrameSaver SLV 9124. Test Menu Examplemain/test

Troubleshooting 6-179124-A2-LB20-00March 2000NOTE:These configuration options do not pertain to tests commanded by the DTE,like a DTE-initiated Extern

Troubleshooting 6-189124-A2-LB20-00March 2000Aborting All Tests Use the Abort All Tests selection from the Test menu to abort all tests running onall

About the FrameSaver SLV 9124 1-49124-A2-LB20-00March 2000H Configuration Upload/Download and Software Download Capability.Provides quick transfer of

Troubleshooting 6-199124-A2-LB20-00March 2000PVC TestsPVC tests can be run on a requested DLCI for a selected interface.H When PVC tests are on a mult

Troubleshooting 6-209124-A2-LB20-00March 2000PVC LoopbackThe PVC Loopback loops frames back to the selected interface on a per-PVCbasis. This test log

Troubleshooting 6-219124-A2-LB20-00March 2000Monitor PatternThis test monitors packets filled with a hexadecimal 55 test pattern and sequencenumber ov

Troubleshooting 6-229124-A2-LB20-00March 2000Physical TestsA FrameSaver 9124 unit’s physical tests screen for the network interface isshown below.Main

Troubleshooting 6-239124-A2-LB20-00March 2000Line LoopbackThe Line Loopback (LLB) loops the information received on the selected interfaceback to the

Troubleshooting 6-249124-A2-LB20-00March 2000Payload LoopbackThe Payload Loopback (PLB) loops the information received on the selectedinterface back t

Troubleshooting 6-259124-A2-LB20-00March 2000Repeater LoopbackThe Repeater Loopback (RLB) loops data received from the data ports and theDSX-1 interfa

Troubleshooting 6-269124-A2-LB20-00March 2000DTE LoopbackThe DTE external Loopback (DTLB) test loops the received signal on a DTEinterface back to the

Troubleshooting 6-279124-A2-LB20-00March 2000Send Line LoopbackThe remote Line Loopback (LLB) up and down codes are in-band codes thatallow control of

Troubleshooting 6-289124-A2-LB20-00March 2000Data Channel Loopbacks on a Frame Relay LinkA network-initiated Data Channel Loopback (DCLB) that loops d

About the FrameSaver SLV 9124 1-59124-A2-LB20-00March 2000H NetScout Manager Plus and NetScout Probe Support. Provides completeLAN and WAN traffic ana

Troubleshooting 6-299124-A2-LB20-00March 2000Send Remote Line LoopbackThe remote Line Loopback (LLB) up and down codes are in-band codes thatallow con

Troubleshooting 6-309124-A2-LB20-00March 2000Send and Monitor Pattern TestsThe pattern tests enable a FrameSaver unit to either send or monitor a know

Troubleshooting 6-319124-A2-LB20-00March 2000IP Ping TestAn IP Ping test can be run to test connectivity between the FrameSaver unit andany FrameSaver

Troubleshooting 6-329124-A2-LB20-00March 2000" Procedure 2To Ping the NMS at the central site:1. Verify that the central site NMS has the FrameSa

7-19124-A2-LB20-00March 2000Setting Up OpenLane forFrameSaver Devices7This chapter includes:H OpenLane Support of FrameSaver DevicesH Setting Up the

Setting Up OpenLane for FrameSaver Devices 7-29124-A2-LB20-00March 2000Setting Up the OpenLane SLM SystemInstructions for installing Paradyne’s OpenLa

8-19124-A2-LB20-00March 2000Setting Up NetScout Manager Plusfor FrameSaver Devices8This chapter includes NetScout Manager Plus information as it rela

Setting Up NetScout Manager Plus for FrameSaver Devices 8-29124-A2-LB20-00March 2000Before Getting StartedBefore getting started, you need to copy som

Setting Up NetScout Manager Plus for FrameSaver Devices 8-39124-A2-LB20-00March 2000Configuring NetScout Manager PlusFor the NetScout Manager Plus mai

Setting Up NetScout Manager Plus for FrameSaver Devices 8-49124-A2-LB20-00March 2000Adding FrameSaver SLV Units to the NetScout Manager Plus Network&q

About the FrameSaver SLV 9124 1-69124-A2-LB20-00March 2000This page intentionally left blank.

Setting Up NetScout Manager Plus for FrameSaver Devices 8-59124-A2-LB20-00March 2000Verifying Domains and Groups"Procedure1. From the NetScout Ma

Setting Up NetScout Manager Plus for FrameSaver Devices 8-69124-A2-LB20-00March 2000Correcting Domains and GroupsProperties need to be edited when not

Setting Up NetScout Manager Plus for FrameSaver Devices 8-79124-A2-LB20-00March 20003. To add a FrameSaver SLV-supported domain or correct property se

Setting Up NetScout Manager Plus for FrameSaver Devices 8-89124-A2-LB20-00March 2000Adding SLV Alarms Using a TemplateOnce DLCIs have been discovered,

Setting Up NetScout Manager Plus for FrameSaver Devices 8-99124-A2-LB20-00March 2000Editing Alarms"Procedure1. From the NetScout Manager Plus mai

Setting Up NetScout Manager Plus for FrameSaver Devices 8-109124-A2-LB20-00March 20004. Edit any trap defaults that may be required. See Step 4 of Add

Setting Up NetScout Manager Plus for FrameSaver Devices 8-119124-A2-LB20-00March 2000Adding SLV Alarms ManuallyOnce DLCIs have been discovered, SLV al

Setting Up NetScout Manager Plus for FrameSaver Devices 8-129124-A2-LB20-00March 20004. Click on the ... button to the right of indicated fields for a

Setting Up NetScout Manager Plus for FrameSaver Devices 8-139124-A2-LB20-00March 2000Creating History FilesUp to 14 additional user history tables can

Setting Up NetScout Manager Plus for FrameSaver Devices 8-149124-A2-LB20-00March 2000" Procedure1. Open a terminal window and go to $NSHOME/usr.2

9124-A2-LB20-00March 2000FrameSaverrSLV 9124User's Guide

2-19124-A2-LB20-00March 2000User Interface andBasic Operation2This chapter tells you how to access, use, and navigate the menu-driven userinterface.

Setting Up NetScout Manager Plus for FrameSaver Devices 8-159124-A2-LB20-00March 2000Installing the User-Defined History FilesOnce the user-defined hi

Setting Up NetScout Manager Plus for FrameSaver Devices 8-169124-A2-LB20-00March 2000Monitoring a DLCI’s History DataOnce the monitoring variables hav

Setting Up NetScout Manager Plus for FrameSaver Devices 8-179124-A2-LB20-00March 20005. Select History List from the View menu. The History List windo

Setting Up NetScout Manager Plus for FrameSaver Devices 8-189124-A2-LB20-00March 2000Using the 2D or 3D Bar to view the user history data collected, y

Setting Up NetScout Manager Plus for FrameSaver Devices 8-199124-A2-LB20-00March 2000" Procedure1. Select the Traffic radio button to monitor the

Setting Up NetScout Manager Plus for FrameSaver Devices 8-209124-A2-LB20-00March 2000Statistical Windows SupportedNot all icons that appear on the Net

9-19124-A2-LB20-00March 2000Setting Up Network Health forFrameSaver Devices9FrameSaver units are compatible with Concord Communication’s Network Heal

Setting Up Network Health for FrameSaver Devices 9-29124-A2-LB20-00March 2000For additional information about installing, accessing, and managing Fram

Setting Up Network Health for FrameSaver Devices 9-39124-A2-LB20-00March 2000Discovering FrameSaver ElementsOnce licenses are entered and you have acc

Setting Up Network Health for FrameSaver Devices 9-49124-A2-LB20-00March 2000Configuring the Discovered ElementsNetwork Health sets the speed for disc

User Interface and Basic Operation 2-29124-A2-LB20-00March 2000Logging OnStart a session using one of the following methods:H Telnet session via:— An

Setting Up Network Health for FrameSaver Devices 9-59124-A2-LB20-00March 2000Grouping Elements for ReportsOnce the discovery process is completed and

Setting Up Network Health for FrameSaver Devices 9-69124-A2-LB20-00March 2000Generating Reports for a GroupOnce Network Health has had sufficient time

Setting Up Network Health for FrameSaver Devices 9-79124-A2-LB20-00March 2000About Trend ReportsBy specifying specific variables like bandwidth, trend

Setting Up Network Health for FrameSaver Devices 9-89124-A2-LB20-00March 2000— Elements Summary Report – Compares DLCI traffic with volume andthe base

Setting Up Network Health for FrameSaver Devices 9-99124-A2-LB20-00March 2000H Trend Reports – Perform trend analysis on up to ten specified variables

Setting Up Network Health for FrameSaver Devices 9-109124-A2-LB20-00March 2000This page intentionally left blank.

A-19124-A2-LB20-00March 2000Menu HierarchyAMenusThe following is a graphical representation of the FrameSaver SLV 9124 unit’smenu organization.

Menu Hierarchy A-29124-A2-LB20-00March 200099-16345aMenu HierarchySystem andTest Status• Self-Test Results• Health and Status• Test StatusStatusSyste

Menu Hierarchy A-39124-A2-LB20-00March 2000MAIN MENU Status Test Configuration Auto-Configuration ControlAuto-Configuration• Frame Relay Discover

Menu Hierarchy A-49124-A2-LB20-00March 2000This page intentionally left blank.

User Interface and Basic Operation 2-39124-A2-LB20-00March 2000If your login was . . . Then the . . .Valid Main Menu appears (see page 2-4). Begin you

B-19124-A2-LB20-00March 2000SNMP MIBs and Traps, andRMON Alarm DefaultsBThis appendix contains the following:H MIB SupportH Downloading MIBs and SNMP

SNMP MIBs and Traps, and RMON Alarm Defaults B-29124-A2-LB20-00March 2000MIB SupportThe FrameSaver unit supports the SNMP Version 1, and has the capab

SNMP MIBs and Traps, and RMON Alarm Defaults B-39124-A2-LB20-00March 2000System Group (mib-2)This section provides the system description and system o

SNMP MIBs and Traps, and RMON Alarm Defaults B-49124-A2-LB20-00March 2000Interfaces Group (mib-2)Clarification for objects in the Interfaces Group, as

SNMP MIBs and Traps, and RMON Alarm Defaults B-59124-A2-LB20-00March 2000NetScout Indexes to the Interface Table (ifTable)For remote monitoring at sit

SNMP MIBs and Traps, and RMON Alarm Defaults B-69124-A2-LB20-00March 2000Standards Compliance for SNMP TrapsThis section describes the FrameSaver unit

SNMP MIBs and Traps, and RMON Alarm Defaults B-79124-A2-LB20-00March 2000Trap: warmStartThis trap indicates that the FrameSaver unit has been reset an

SNMP MIBs and Traps, and RMON Alarm Defaults B-89124-A2-LB20-00March 2000Traps: linkUp and linkDownThese traps are supported on the following interfac

SNMP MIBs and Traps, and RMON Alarm Defaults B-99124-A2-LB20-00March 2000Table B-6. linkUp and linkDown Variable-Bindings (1 of 2)InterfaceVariable-Bi

SNMP MIBs and Traps, and RMON Alarm Defaults B-109124-A2-LB20-00March 2000Table B-6. linkUp and linkDown Variable-Bindings (2 of 2)Interface Possible

User Interface and Basic Operation 2-49124-A2-LB20-00March 2000Main MenuEntry to all of the FrameSaver unit’s tasks begins at the Main Menu, which has

SNMP MIBs and Traps, and RMON Alarm Defaults B-119124-A2-LB20-00March 2000Traps: enterprise-SpecificThese traps indicate that an enterprise-specific e

SNMP MIBs and Traps, and RMON Alarm Defaults B-129124-A2-LB20-00March 2000Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 3)Trap Poss

SNMP MIBs and Traps, and RMON Alarm Defaults B-139124-A2-LB20-00March 2000Table B-7. enterprise-Specific Traps and Variable-Bindings (3 of 3)Trap Poss

SNMP MIBs and Traps, and RMON Alarm Defaults B-149124-A2-LB20-00March 2000Traps: RMON-SpecificTwo traps are defined to support the Alarm and Events Gr

SNMP MIBs and Traps, and RMON Alarm Defaults B-159124-A2-LB20-00March 2000RMON Alarm and Event DefaultsThe FrameSaver unit supports automatic generati

SNMP MIBs and Traps, and RMON Alarm Defaults B-169124-A2-LB20-00March 2000Physical Interface Alarm DefaultsThis alarm only applies to the FrameSaver u

SNMP MIBs and Traps, and RMON Alarm Defaults B-179124-A2-LB20-00March 2000Frame Relay Link Alarm DefaultsThese alarms apply to the FrameSaver unit’s f

SNMP MIBs and Traps, and RMON Alarm Defaults B-189124-A2-LB20-00March 2000Table B-10. Frame Relay Link Alarm Defaults (2 of 2)ItemFallingThresholdDefa

SNMP MIBs and Traps, and RMON Alarm Defaults B-199124-A2-LB20-00March 2000DLCI Alarm Defaults – Paradyne AreaThese alarms apply to all DLCIs on the ne

SNMP MIBs and Traps, and RMON Alarm Defaults B-209124-A2-LB20-00March 2000DLCI Alarm Defaults – NetScout AreaThese alarms can be created during RMON i

User Interface and Basic Operation 2-59124-A2-LB20-00March 2000Screen Work AreasThere are two user work areas:H Screen area – Where you input informat

SNMP MIBs and Traps, and RMON Alarm Defaults B-219124-A2-LB20-00March 2000Table B-12. Static DLCI Alarm Defaults – NetScout Area (2 of 2)ItemFallingTh

SNMP MIBs and Traps, and RMON Alarm Defaults B-229124-A2-LB20-00March 2000Object ID Cross-References (Numeric Order)The FrameSaver unit supports autom

SNMP MIBs and Traps, and RMON Alarm Defaults B-239124-A2-LB20-00March 2000Table B-14. History OID Cross-Reference (1 of 4)Object ID (OID)1Item MIB/Tag

SNMP MIBs and Traps, and RMON Alarm Defaults B-249124-A2-LB20-00March 2000Table B-14. History OID Cross-Reference (2 of 4)Object ID (OID)1MIB/TagItem.

SNMP MIBs and Traps, and RMON Alarm Defaults B-259124-A2-LB20-00March 2000Table B-14. History OID Cross-Reference (3 of 4)Object ID (OID)1MIB/TagItem.

SNMP MIBs and Traps, and RMON Alarm Defaults B-269124-A2-LB20-00March 2000Table B-14. History OID Cross-Reference (4 of 4)Object ID (OID)1MIB/TagItem.

SNMP MIBs and Traps, and RMON Alarm Defaults B-279124-A2-LB20-00March 2000Table B-15. Alarm OID Cross-Reference (1 of 2)Object ID (OID)Item MIB/Tag.1.

SNMP MIBs and Traps, and RMON Alarm Defaults B-289124-A2-LB20-00March 2000Table B-15. Alarm OID Cross-Reference (2 of 2)Object ID (OID) MIB/TagItem.1.

C-19124-A2-LB20-00March 2000Connectors, Cables, andPin AssignmentsCThis appendix shows the FrameSaver unit’s rear panel, and the pin assignmentsfor t

Connectors, Cables, and Pin Assignments C-29124-A2-LB20-00March 2000COM Port ConnectorThe following table provides the pin assignments for the FrameSa

User Interface and Basic Operation 2-69124-A2-LB20-00March 2000Navigating the ScreensYou can navigate the screens by:H Using keyboard keys.H Switching

Connectors, Cables, and Pin Assignments C-39124-A2-LB20-00March 2000LAN Adapter Converter and CableIf connecting to a LAN, order a plug-to-modular jac

Connectors, Cables, and Pin Assignments C-49124-A2-LB20-00March 2000Standard EIA-232-D Crossover CableA standard crossover cable can be used to connec

Connectors, Cables, and Pin Assignments C-59124-A2-LB20-00March 2000" ProcedureTo configure an external modem:1. Disconnect the asynchronous term

Connectors, Cables, and Pin Assignments C-69124-A2-LB20-00March 2000Port 1 ConnectorThe following table provides the pin assignments for the 34-positi

Connectors, Cables, and Pin Assignments C-79124-A2-LB20-00March 2000Standard V.35 Straight-through CableA standard V.35 straight-through cable can be

Connectors, Cables, and Pin Assignments C-89124-A2-LB20-00March 2000T1 Network Cable (Feature No. 3100-F1-500)Network access is via a 20-foot cable wi

Connectors, Cables, and Pin Assignments C-99124-A2-LB20-00March 2000DSX-1 ConnectorIf your model includes a DSX-1 interface, the following table shows

Connectors, Cables, and Pin Assignments C-109124-A2-LB20-00March 2000This page intentionally left blank.

D-19124-A2-LB20-00March 2000Technical SpecificationsDTable D-1. FrameSaver SLV 9124 Technical Specifications (1 of 2)SpecificationCriteriaApprovalsFC

Technical Specifications D-29124-A2-LB20-00March 2000Table D-1. FrameSaver SLV 9124 Technical Specifications (2 of 2)Specification CriteriaCOM PortSta

User Interface and Basic Operation 2-79124-A2-LB20-00March 2000Function KeysAll function keys (located in the lower part of the screen; see the exampl

E-19124-A2-LB20-00March 2000Equipment ListEEquipmentSee page E-2 for cables you can order.DescriptionModel/FeatureNumberFrameSaver SLV UnitsFrameSave

Equipment List E-29124-A2-LB20-00March 2000DescriptionModel/FeatureNumberOptional FeaturesWall Mounting Kit for 1-Slot Housing 9001-F1-891Shelf Mounti

IN-19124-A2-LB20-00 March 2000IndexNumbers55 hexadecimal, test pattern, 6-20, 6-21Aaborting tests, 6-18AccessDial-In, 3-67Name, 3-54Type, 3-58Ac

IndexIN-29124-A2-LB20-00March 2000Clearingcross connection assignments, 3-32Event, LMI, 3-19, 3-41existing information, 3-8clearing statistics, 5

IndexIN-39124-A2-LB20-00 March 2000Dial-In Access, 3-67Dial-OutDelay Time (Min), 3-62Directory, 3-62options, 3-9, 3-59Trap, 3-61Directory, Alter

IndexIN-49124-A2-LB20-00March 2000Ffaceplate, 5-3FDR, 1-2features, 1-2field is blank/empty, 2-9file transfer, 5-37FTP (file transfer protocol),

IndexIN-59124-A2-LB20-00 March 2000LineBuild Out (LBO), 3-24Coding Format, 3-24, 3-30Equalization, 3-31Framing Format, 3-24, 3-30Loopback, 6-23

IndexIN-69124-A2-LB20-00March 2000minimal remote configuration, 3-8Modechanging Operating, demos, 3-16Test, 5-4model number, 2-5modemHealth and St

IndexIN-79124-A2-LB20-00 March 2000Payload Loopback, 6-24performance statistics, 5-25, 6-2clearing, 5-26Performance Wizard, copying directory, 8-

IndexIN-89124-A2-LB20-00March 2000router, setting up to receive RIP, 3-15router-independence, 1-3, 3-18Routing, Information Protocol (RIP), 3-66ru

User Interface and Basic Operation 2-89124-A2-LB20-00March 2000Selecting from a Menu"ProcedureTo select from a menu:1. Tab or press the down arro

IndexIN-99124-A2-LB20-00 March 2000statistics, 1-3, 5-25elements, 9-3selecting performance intervals for display, 5-34uploading to an NMS, 5-41St

IndexIN-109124-A2-LB20-00March 2000TrapsauthentificationFailure, B-7DLCI, 3-61Enterprise Specific, 3-60, B-11General, 3-60Link, 3-60Link Interfa

User Interface and Basic Operation 2-99124-A2-LB20-00March 2000Selecting a FieldOnce you reach the desired menu or screen, select a field to view or c

User Interface and Basic Operation 2-109124-A2-LB20-00March 2000This page intentionally left blank.

A9124-A2-LB20-00March 2000Copyright E 2000 Paradyne Corporation.All rights reserved.Reprinted under license agreement with Paradyne Corporation.Print

3-19124-A2-LB20-00March 2000Configuration3This chapter includes the following:H Basic Configuration— Configuration Option Areas— Accessing and Displa

Configuration 3-29124-A2-LB20-00March 2000H Configuring the Overall System— Configuring Frame Relay and LMI for the System— Configuring Service Level

Configuration 3-39124-A2-LB20-00March 2000Basic ConfigurationConfiguration option settings determine how the FrameSaver unit operates. Usethe FrameSav

Configuration 3-49124-A2-LB20-00March 2000Configuration Option AreasThe FrameSaver unit arrives with configured factory default settings, which areloc

Configuration 3-59124-A2-LB20-00March 2000Accessing and Displaying Configuration OptionsTo access and display configuration options, load (copy) the a

Configuration 3-69124-A2-LB20-00March 2000Changing Configuration Options"ProcedureTo change configuration option settings:1. From the Configurati

Configuration 3-79124-A2-LB20-00March 2000Saving Configuration OptionsWhen changes to the configuration options are complete, use the Save functionkey

Configuration 3-89124-A2-LB20-00March 2000Minimal Configuration Before Deploying Remote UnitsAt a minimum, the following configuration options must be

Configuration 3-99124-A2-LB20-00March 2000Setting Up for Trap Dial-OutAn external modem can be attached to the COM port for dialing out when anSNMP tr

Configuration 3-109124-A2-LB20-00March 2000Setting Up Auto-ConfigurationThe auto-configuration feature allows you to select a method of automaticconfi

i9124-A2-LB20-00March 2000ContentsAbout This GuideH Purpose and Intended Audience vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration 3-119124-A2-LB20-00March 2000Selecting a Frame Relay Discovery ModeWhen a Frame Relay Discovery Mode is active, the FrameSaver unit “dis

Configuration 3-129124-A2-LB20-00March 2000NOTE:If 1MPort (the default) is not the setting required for your application, changethe Frame Relay Discov

Configuration 3-139124-A2-LB20-00March 2000When a Frame Relay Discovery Mode is changed and saved, the Saving willcause Auto-Configuration to update a

Configuration 3-149124-A2-LB20-00March 2000Setting Up ManagementFrameSaver units are already set up for SNMP management, with CommunityName 1 set to P

Configuration 3-159124-A2-LB20-00March 2000Setting Up So the Router Can Receive RIPUsing the system’s standard Routing Information Protocol (RIP) feat

Configuration 3-169124-A2-LB20-00March 20005. Select the Delete EDLCI Connections and Make a Mgmt OnlyPVC option.PVC connections for the selected DLCI

Configuration 3-179124-A2-LB20-00March 2000Configuration Option TablesConfiguration option descriptions contained in this chapter are in menu order,ev

Configuration 3-189124-A2-LB20-00March 2000Configuring Frame Relay and LMI for the SystemSelect Frame Relay and LMI from the System menu to display or

Configuration 3-199124-A2-LB20-00March 2000Table 3-1. System Frame Relay and LMI Options (2 of 2)LMI Clearing Event (N3)Possible Settings: 1, 2, 3, 4,

Configuration 3-209124-A2-LB20-00March 2000Configuring Service Level Verification OptionsSLV options are selected from the System menu (see Table 3-2)

Contents ii9124-A2-LB20-00March 2000H Setting Up Auto-Configuration 3-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selec

Configuration 3-219124-A2-LB20-00March 2000Table 3-2. Service Level Verification Options (2 of 2)SLV Timeout Clearing Event ThresholdAvailable Setting

Configuration 3-229124-A2-LB20-00March 2000Configuring General System OptionsSelect General from the System menu to configure the general systemconfig

Configuration 3-239124-A2-LB20-00March 2000Table 3-3. General System Options (2 of 2)Secondary Clock SourcePossible Settings: Net1, DSX, InternalDefa

Configuration 3-249124-A2-LB20-00March 2000Configuring the Physical InterfacesCharacteristics for the following physical interfaces can be configured:

Configuration 3-259124-A2-LB20-00March 2000Table 3-4. Network Physical Interface Options (2 of 4)Bit StuffingPossible Settings: 62411, DisableDefault

Configuration 3-269124-A2-LB20-00March 2000Table 3-4. Network Physical Interface Options (3 of 4)Network Initiated PLBPossible Settings: Enable, Disab

Configuration 3-279124-A2-LB20-00March 2000Table 3-4. Network Physical Interface Options (4 of 4)Excessive Error Rate ThresholdPossible Settings: 10E-

Configuration 3-289124-A2-LB20-00March 2000Configuring the User Data PortSelect Physical from the Data Ports menu to configure the physicalcharacteris

Configuration 3-299124-A2-LB20-00March 2000Table 3-5. Data Port Physical Interface Options (2 of 2)Monitor RTS (Control)Possible Settings: Enable, Dis

Configuration 3-309124-A2-LB20-00March 2000Configuring the DSX-1 InterfaceSelect DSX-1 to display or change the physical configuration options when aD

Contents iii9124-A2-LB20-00March 20004 Security and LoginsH Limiting Access 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration 3-319124-A2-LB20-00March 2000Table 3-6. DSX-1 Physical Interface Options (2 of 2)Line EqualizationPossible Settings: 0–133, 133–266, 266

Configuration 3-329124-A2-LB20-00March 2000Assigning Time Slots/Cross ConnectionsThe system allows you to assign data paths between the various interf

Configuration 3-339124-A2-LB20-00March 2000 Frame Relay Network Time Slot Assignment Screen Examplemain/config/tslot_assign/frame_relay 9124Device N

Configuration 3-349124-A2-LB20-00March 2000" Procedure1. Follow this menu selection sequence:Main Menu →Configuration →Time Slot Assignment →Fram

Configuration 3-359124-A2-LB20-00March 2000 DSX-1 to Network Time Slot Assignment Screen Example (Page 1)main/config/tslot_assign/dsx 9124Device Name

Configuration 3-369124-A2-LB20-00March 2000" Procedure1. Follow this menu selection sequence:Configuration →Time Slot Assignment→DSX-to-Network A

Configuration 3-379124-A2-LB20-00March 2000When a CGA condition (LOS, OOF, or AIS) is declared for a T1 interface, thesignaling bits being transmitted

Configuration 3-389124-A2-LB20-00March 2000Table 3-7. Signaling and Trunk Conditioning Values (2 of 3)Network Side DSX-1 SideMeaningE&M-idle The s

Configuration 3-399124-A2-LB20-00March 2000Table 3-7. Signaling and Trunk Conditioning Values (3 of 3)Network Side DSX-1 SideMeaningFXSD-busy The sign

Configuration 3-409124-A2-LB20-00March 2000Configuring Frame Relay for an InterfaceSelect Frame Relay from the interface’s menu to display or change t

Contents iv9124-A2-LB20-00March 20006 TroubleshootingH Problem Indicators 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration 3-419124-A2-LB20-00March 2000Table 3-8. Interface Frame Relay Options (2 of 3)LMI ParametersPossible Settings: System, CustomDefault Set

Configuration 3-429124-A2-LB20-00March 2000Table 3-8. Interface Frame Relay Options (3 of 3)LMI Inbound Heartbeat (T2)Possible Settings: 5, 10, 15, 20

Configuration 3-439124-A2-LB20-00March 2000Manually Configuring DLCI RecordsThe Auto-Configuration feature automatically configures DLCI Records and t

Configuration 3-449124-A2-LB20-00March 2000Table 3-9. DLCI Record Options (2 of 3)CIR (bps)Possible Settings: 0 – 1536000Default Setting: 64000Determi

Configuration 3-459124-A2-LB20-00March 2000Table 3-9. DLCI Record Options (3 of 3)DLCI PriorityPossible Settings: Low, Medium, HighDefault Setting: Hi

Configuration 3-469124-A2-LB20-00March 2000Configuring PVC ConnectionsThe Auto-Configuration feature automatically configures PVC Connectionsand their

Configuration 3-479124-A2-LB20-00March 2000Table 3-10. PVC Connection Options (2 of 2)Primary Destination LinkPossible Settings: Net1-FR1Default Setti

Configuration 3-489124-A2-LB20-00March 2000Setting Up Management and Communication OptionsThe following options can be selected from the Management an

Configuration 3-499124-A2-LB20-00March 2000Table 3-11. Node IP Options (1 of 2)Node IP Address Possible Settings: 001.000.000.000 – 223.255.255.255, C

Configuration 3-509124-A2-LB20-00March 2000Table 3-11. Node IP Options (2 of 2)TS Management LinkAvailable Settings: None, PVCnameDefault Setting: Non

Contents v9124-A2-LB20-00March 20008 Setting Up NetScout Manager Plus for FrameSaver DevicesH Before Getting Started 8-2. . . . . . . . . . . . . . .

Configuration 3-519124-A2-LB20-00March 2000Configuring Management PVCsSelect Management PVCs to define inband management links by adding orchanging Ma

Configuration 3-529124-A2-LB20-00March 2000Table 3-12. Management PVC Options (2 of 3)Intf Subnet MaskPossible Settings: Node-Subnet-Mask, Calculate,

Configuration 3-539124-A2-LB20-00March 2000Table 3-12. Management PVC Options (3 of 3)Primary DLCIPossible Settings: 16 – 1007Default Setting: Initial

Configuration 3-549124-A2-LB20-00March 2000Configuring General SNMP ManagementSelect General SNMP Management to add, change, or delete the information

Configuration 3-559124-A2-LB20-00March 2000Configuring Telnet and/or FTP Session SupportTelnet and FTP options control whether a Telnet or FTP (File T

Configuration 3-569124-A2-LB20-00March 2000Table 3-14. Telnet and FTP Session Options (2 of 3)Session Access LevelPossible Settings: Level-1, Level-2,

Configuration 3-579124-A2-LB20-00March 2000Table 3-14. Telnet and FTP Session Options (3 of 3)Disconnect Time (Minutes)Possible Settings: 1 – 60Defaul

Configuration 3-589124-A2-LB20-00March 2000Configuring SNMP NMS Security OptionsSelect SNMP NMS Security from the Management and Communication menu to

Configuration 3-599124-A2-LB20-00March 2000Configuring SNMP Traps and Trap Dial-OutSelect SNMP Traps from the Management and Communication menu toconf

Configuration 3-609124-A2-LB20-00March 2000Table 3-16. SNMP Traps and Trap Dial-Out Options (2 of 4)Initial Route DestinationPossible Settings: AutoRo

Contents vi9124-A2-LB20-00March 2000H Standards Compliance for SNMP Traps B-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . Trap: warmStart

Configuration 3-619124-A2-LB20-00March 2000Table 3-16. SNMP Traps and Trap Dial-Out Options (3 of 4)Link Traps InterfacesPossible Settings: Network, D

Configuration 3-629124-A2-LB20-00March 2000Table 3-16. SNMP Traps and Trap Dial-Out Options (4 of 4)Trap DisconnectPossible Settings: Enable, DisableD

Configuration 3-639124-A2-LB20-00March 2000Configuring the Communication PortSelect Communication Port from the Management and Communication menu todi

Configuration 3-649124-A2-LB20-00March 2000Table 3-17. Communication Port Options (2 of 4)Stop BitsPossible Settings: 1, 2Default Setting: 1Determines

Configuration 3-659124-A2-LB20-00March 2000Table 3-17. Communication Port Options (3 of 4)Inactivity TimeoutPossible Settings: Enable, DisableDefault

Configuration 3-669124-A2-LB20-00March 2000Table 3-17. Communication Port Options (4 of 4) Link ProtocolPossible Settings: PPP, SLIPDefault Setting: P

Configuration 3-679124-A2-LB20-00March 2000Configuring the COM Port to Support an External ModemSelect External Modem (Com Port) to display or change

Configuration 3-689124-A2-LB20-00March 2000Table 3-18. External Modem (COM Port) Options (2 of 2)Alternate IP AddressPossible Settings: 001.000.000.00

4-19124-A2-LB20-00March 2000Security and Logins4This chapter includes the following:H Limiting AccessH Controlling Asynchronous Terminal AccessH Cont

Security and Logins 4-29124-A2-LB20-00March 2000Limiting AccessThe FrameSaver unit provides access security on the following interfaces:H Asynchronous