Lucent Technologies Switch P333T Bedienungsanleitung Seite 58

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 82
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 57
Chapter 5 Cajun Campus CLI (Command Line Interface)
48 Cajun P333T User’s Guide
SNMP config change traps enabled.
Console> (enable)
To enable all traps to a specific manager:
Console> (enable) set snmp trap 192.122.173.42 enable all
All SNMP traps enabled.
Console> (enable)
To disable SNMP config traps to a specific manager:
Console> (enable) set snmp trap 192.122.173.42 disable config
SNMP config traps disabled.
Console> (enable)
To add an entry in the SNMP trap receiver table with default:
Console> (enable) set snmp trap 192.122.173.42
SNMP trap receiver added.
Console> (enable)
Set system location command
Use the Set system location command to set the mib2 system location MIB variable.
The syntax for this command is (a string of 2 words or more must be type inside
inverted commas – e.g. ‘Operations Floor’ ):
set system location
[string]
Set system name command
Use the Set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name
[string]
string location string. The location is cleared if this field is blank.
string
location string. The location is cleared if this field is blank.
Seitenansicht 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 81 82

Kommentare zu diesen Handbüchern

Keine Kommentare